Performed Maitenence on system. Cleaned/treated drain line and primary drain pan. Cleaned condenser coils. Evaporator coils are clean. Verified safety float switch functionality. Checked amp draw on compressor. Checked amp draw on fan motor. Checked capacitor is not within factory range. Inspected Contactar and found contactar has weak contacts. Made sure all connections are tight. System is cooling with a 20° temperature split at this time. Recommending replacing the capacitor and contactar. Sending quote for both. Also sending quote for our Maitenence plan which will apply 10% off for repairs.

Reason for call: Return repair Summary: Replaced Evaporator coil on master bedroom zone. Completed repair to restore operation to equipment. Unit is cooling with a 20 degree split. Proper pressure. Drain line operation is proper.

11 Year Daikin System (Second Owner) 2.5T Downstairs (Vertical Closet) Diagnostic -system low on refrigerant unit indicating leak (outdoor data tag panel indicates a dye test was performed a year ago, home owner states they were not able to trace leak) -outdoor capacitor reading outside factory specifications -drain line has active water in float System has not been maintenance since last year Air Handler Further Notes -bacterial growth on back side of coils -bacterial growth inside air handler cabinet/blower wheel Outdoor Condenser Further Notes -outdoor coils impacted with debris -outdoor disconnect exposed (face plate missing) -outdoor suction line lacking insulation Went over all issues with home owner. Offered leak search options and replacement options. Home owner would like to complete minimal repair and keep system going. Scope of work performed -cleared drain line -cleared drain pan & pan canals -added pan tablets and solution to help with further buildup

-5" duct run -Connect directly to back of main plenum -Run as close to new addition as possible -New boot and grille -Strap and seal run

Reason for call: No cool Summary: Found unit almost flat on charge. Added nitro to find leak in evaporator coil. Sold coil replacement for wed. 8-10 arrival.

Clogged drain line. Cleared and treated drain and primary drain pan. System is back up and running. System is draining properly at this time. Temperature split is 21° Evaporator coils are very dirty causing some air flow restriction. This can increase the chances of the safety float switch getting tripped.

Upon my inspection, found small amount of water in safety float switch. Offer drain line cleaning but Client already cleaned their condensate pump and drain line. Client would like to wait to schedule a tuneup a week out for Regular maintenance. I checked temperature split and found system is cooling with a 17° temperature split. I let Client know that during the Maintenence) we will make sure all components are working efficiently and at the system is properly charged with refrigerant. System is cooling and draining at this time. System does not have a P-trap going to the condensate pump. Recommending installing a P-trap with insulation, but Client would like to install P-trap on their own.

Found system Not cooling due to clogged drain line and pan. I cleaned both and cleaned coil. I then verified proper operation. No further issues. Poured water in pan to test drainage.

Reason for call: Member tune up x2 Summary: Completed maintenance for two systems. Found operation within manufacturing specifications. Flushed drain lines. Flushed coils. Confirmed proper temperature. Filters have been maintained properly. Unit three is not in membership. Flushed drain line and replaced capacitor today.

Upon my inspection, found system has a bad capacitor. Recommended replacing the capacitor and the contactor as they work together to start up and keep the condenser running. Client would like to replace both. Replaced both components made sure all wiring had good connections. Started system up and verified. System has good amp draw readings. System is cooling with a 19° temperature split. Let client know their condenser coils are corroded heaving on the bottom and at risk of a refrigerant leak. Waived $95 feet with repair

Mitsubishi 9k 12 year parts warranty 3 year labor warranty Cash price 2 hurricane pads Line cover New electric run Drain line Refrigerant line set Breaker

Found bad capacitor. Client would like to repair themselves. System is not cooling at this time.

Ruud 2 ton Heat pump 15 seer 2 stage 5 kw -Use existing slab -Hurricane tiedowns -UV rated armorflex -Drain pan -Safeties -New 4” filter rack -Filter drier -Flush drain -Seal to existing plenums 10 year parts warranty 5 year labor warranty

Unit for upstairs had compressor Failing. It’s running for now but did cut out several times while I was here. All other components and wiring no issues. Customer wants to get several quotes.

Install of gable vent attic fan. Tie into existing electric in attic

Performed Maitenences on systems. Cleaned/treated drain lines and primary drain pans. Found system #1 has a faulty condensate pump and was leaking water excessively. Cleaned condenser coils. Evaporator coils are clean. Verified safety float switch functionalities. Found system #1 had a faulty safety float switch. Checked amp draw on compressors. Checked amp draw on fan motors. Checked capacitors are within factory range. Made sure all connections are tight. Systems are cooling with 20° temperature splits at this time. Replaced system 1 condensate pump and safety float switch 1 year warranty on parts. Changed all client supplied filters.

Reason for call: No cool Equipment: 2019 Icp Horizontal in attic Condenser on left side of home Summary: Found water in secondary safety switch. Removed water adjusted pitch of secondary pan. Poor seal on plenum is what cause cabinet to sweat and trip saftey. Inspected operation of equipment to find it operating within manufacturing specifications. Sold membership and plenum seal for later date. Please schedule for Oct/Nov for first visit and sold work. Call homeowner in a few days to update card on file. He is wanting for card to get sent into him.

4 ton Ruud Invertor Variable speed air handler 18 seer 10 year parts warranty 3 year labor warranty -8kw heater -Hurricane pad -Breakers -New wire ran as needed -Electrical whip -Hurricane tiedowns -UV rated armorflex -Drain pan -Safeties -Seal to existing plenums -Cut in returns in 2 bedrooms -4" filter rack -UV light -Econet wifi stat -Surge pro at air handler and condenser -Flush drain and insulate where needed -Filter drier -Duct sanitization -Vacuum lines under 500 microns -100% satisfaction guarantee

Client had poor duct design and duct leakage. Also Bosch system blowing air too cold at 48°. System needs to be commissioned and ducts replaced. All ducts sweating and leaking. Not properly sealed or strapped. Also recommended attic fan to client and insulation installed after duct job. Advised duct job would have to wait til October. Sending quote for R8 ducts

Upon arrival, the homeowner stated that the drain line was clogged. During my diagnostic, I found water backed up into the float switch, and the condensate was not draining properly outside. I explained that routine preventative maintenance helps prevent issues like this, and the homeowner agreed to enroll in our maintenance plan. I performed a complete drain line treatment and cleaned the drain pan. After completing the service, I tested the system and verified it is operating properly with a 21°F temperature difference. Office: Please schedule maintenance for both HVAC systems sometime this week or next week, as the homeowner requested. There is no rush. If you have any questions, please don’t hesitate to reach out. Thank you for your business, and have a great day!

3.5 Ton 15.2 SEER Heat Pump 2 stage cooling RUUD system ~ 10 Year parts warranty ~ 3 year Labor warranty - paying with card ______ - Installation of Horizontal air handler in attic - New secondary safety pan - Seal plenums to unit - 5 kw back up heat element - New Wifi Thermostat - New safety float switches - New insulation on copper - Strap up drain line for proper pitch - Insulate drain line - Replace breakers as needed - Flush and test existing condensate drain line ______ - Installation of Condenser unit - Flush existing refrigerant lines - Replace breakers as needed - New 4” Miami dade concrete pad - 21” aluminum stands - New Hurricane straps - New UV rated insulation on copper - New filter line dryer - Refrigerant locking caps - Vacuum system to 500 microns - Charge system with refrigerant to proper pressures Also replace downstairs thermostat $350 - Completed to code - Permit 100% satisfaction

Client showed me a video of evaporator coils leaking refrigerant. System is freezing up at this time. Gave options for replacement and repair. Sent quote for replacement.

RUUD Equipment Install New Furnace Install New Insulated Furnace Stand Install New Case Coil Install New Outdoor Condenser Install Vent Piping to Code Install Gas Line to Code Install Thermostat Install Single Bulb UV Primary Float Safety Switch 4” Hurricane Pad Vibration Pads UV Rated Outdoor Insulation Refrigerant Locking Caps Flush Existing Refrigerant Lines Flush Drain Line Hurricane Tie Down Straps Vacuum System Seal Supply/Return Plenums Dispose Older Equipment Permitting 10 Year Parts Warranty 3 Year Labor Warranty 100% Satisfaction *Cash/Check Price *3.5% Credit Card Fee

Reason for call: No cool Equipment: 2012 rheem Vertical in garage Condenser on right side of home Summary: Homeowner called due to a red sensor on unit. This relates to an old outdated float switch. Confirmed this component works and resets properly. Informed homeowner system works well and he should entertain maintenance plan. Drain line was draining well.

Replace air handler blower wheel for right side of home system. No guarantee on blower motor longevity as it has been running with an improperly balanced blower wheel. System is cooling with a 20° temperature split at this time and client is happy with the noise reduction.