Instant Quote Shop Filters Call Air Bros

St. Petersburg, FL

air-bros-team-with-truck

The Best AC Repair in St. Petersburg, FL — From Technicians Your Neighbors Already Trust

When your AC quits in the middle of a St. Pete summer, you don't want a stranger in an unmarked van. You want a technician your neighbors already know and trust. Air Bros Air Conditioning & Electrical has been fixing air conditioners in St. Petersburg since 2020, but our roots run deeper — founder Ricky Orta grew up learning the trade from his father and has been a licensed HVAC contractor since 2006. That local, hands-on experience is why homeowners from Historic Kenwood to Snell Isle call us the best AC repair company in St. Petersburg.

We're headquartered right here in the Shore Acres neighborhood, so when you call, you're not routed to a call center — you're talking to the same local team that services your street.

Call us at 727-217-6148 or contact us online today for all of your HVAC, indoor air quality and electrical needs.

Meet the technicians who service St. Petersburg

What to expect when we show up

Calling a repair company you've never used before shouldn't feel like a gamble. Here's exactly how an Air Bros service call goes, every time.

You'll get a heads-up before we arrive, then a uniformed technician in a marked Air Bros vehicle shows up in the window we promised. We diagnose the whole system — not just the obvious symptom — then explain what we found and what your options are before any work starts. You approve the price up front, we make the repair, and we don't leave until we've confirmed the system is cooling the way it should.

Every technician is a background-checked, drug-tested Air Bros employee — never a subcontractor — and each one is trained to service every major AC and heat pump brand. It's the kind of consistency you can only get from a local team that answers to its own name.

And if something isn't right? Our 100% satisfaction guarantee means we make it right.

Signs you need AC repair

St. Petersburg's heat and humidity push air conditioners harder than almost anywhere else in the country. Call for AC repair if you notice:

  • Warm air blowing from vents, or the system running constantly without cooling
  • Water pooling around your air handler (a common issue in St. Pete's older homes with attic-run drain lines)
  • Musty odors or visible mold near vents — a sign of a clogged condensate line or dirty coil
  • Rising humidity indoors despite the AC running
  • Short cycling, tripped breakers, or a system that won't turn on at all

Our technicians diagnose the full system on every call — refrigerant charge, temperature split, electrical connections, and drain line — so you get a real fix, not a temporary patch.

Comprehensive HVAC Services in St. Petersburg

We offer a full range of heating and cooling services to keep your St. Petersburg, FL, home comfortable year-round:

  • Air Conditioning: From AC repair and AC installation to routine maintenance, we ensure your cooling system keeps you comfortable during those hot Florida summers. We offer same-day service for AC emergencies, so you never have to suffer in the heat.
  • Heating: Stay warm and cozy in the winter with our comprehensive heating services. We repair and install all types of heating systems, including furnaces and heat pumps, and offer preventative maintenance to keep your system running efficiently.
  • Indoor Air Quality: Improve your indoor air quality with our dehumidifier and UV light installation services. We'll help you control excess humidity and eliminate airborne contaminants, creating a healthier home environment.
  • Ductwork: Ensure optimal airflow and energy efficiency with our ductwork repair and installation services. We can address leaks and damage, and design a system that's perfect for your home.
  • Pool Heater Services: Extend your swim season with our pool heater installation and repair services.
  • Electrical Services: From outlet and switch replacements to ceiling fan installations to whole-house surge protector installations, we have the experts to handle your electrical service needs.

Our experienced technicians are skilled in all aspects of HVAC service and are dedicated to providing top-quality workmanship and customer care.

Why Choose Air Bros?

  • Local Expertise: We understand the unique climate challenges of St. Petersburg.
  • Fast and Reliable Service: We offer same-day service for AC emergencies and prioritize prompt service for all your HVAC needs.
  • Experienced Technicians: Our team is highly trained and experienced in all aspects of HVAC service.
  • Upfront Pricing: We provide transparent pricing with no hidden costs.
  • Customer Satisfaction Guaranteed: Your comfort and satisfaction are our top priorities.

Contact Air Bros Today!

Whether you need emergency AC repair, a new heating system installation, or any other HVAC service, Air Bros is here to help. Contact us today for a free consultation or to schedule a service appointment. We're proud to be your trusted HVAC partner in St. Petersburg!

Call us at 727-217-6148 or contact us online today!

Recent Jobs and Reviews in St. Petersburg, FL

St. Petersburg, FL at a glance

Air Bros Air Conditioning & Electrical has completed 25 jobs in St. Petersburg, FL between June 2026 and July 2026.

The most recent job was on July 1, 2026.

Air Bros Air Conditioning & Electrical has completed 1,919 jobs in St. Petersburg, FL in the last 12 months. The first job there was in December 2024.

Job Locations and Reviews

Install 15 seer 3 ton heat pump 
Install new horizontal air handler  
BE SURE TO SWAP uv kit it's new!
Install new thermostat wire to accommodate 2 stage 
Reuse hang kit 
Install new float switches
Install new filter drier 
Custom fabrication of existing plenums 
Install new condenser
Install new condenser pad
Install vibration pads, hurricane straps, & locking caps 
Install new line set insulation 
Install new drain line insulation 
Flushed existing drain & refrigerant lines 
Install new thermostat 
Swap breakers if necessary 
Reuse electrical at both units. 
3 year labor warranty 
10 year parts warranty
Install 15 seer 3 ton heat pump 
Install new horizontal air handler  
BE SURE TO SWAP uv kit it's new!
Install new thermostat wire to accommodate 2 stage 
Reuse hang kit 
Install new float switches
Install new filter drier 
Custom fabrication of existing plenums 
Install new condenser
Install new condenser pad
Install vibration pads, hurricane straps, & locking caps 
Install new line set insulation 
Install new drain line insulation 
Flushed existing drain & refrigerant lines 
Install new thermostat 
Swap breakers if necessary 
Reuse electrical at both units. 
3 year labor warranty 
10 year parts warranty
Martin W.
Martin W. Checked in
Install 15 seer 3 ton heat pump Install new horizontal air handler BE SURE TO SWAP uv kit it's new! Install new thermostat wire to accommodate 2 stage Reuse hang kit Install new float switches Install new filter drier Custom fabrication of existing plenums Install new condenser Install new condenser pad Install vibration pads, hurricane straps, & locking caps Install new line set insulation Install new drain line insulation Flushed existing drain & refrigerant lines Install new thermostat Swap breakers if necessary Reuse electrical at both units. 3 year labor warranty 10 year parts warranty
St. Petersburg, FL 33704
Upon arrival for tune up, found air handler over flowing with water from the supply and return plenums as well as the bottom of the unit. 
System has a clogged drain line and primary safety switch was tilted up which was not allowing for the system to turn off and caused the overflow of water. Cleared drain line as part of tune up. Let client know this is normally an additional charge as it’s not within the scope of a normal maintenance, however today we took care of it at no additional cost. 
Performed Maitenence on system. Cleaned/treated drain line and primary drain pan. Cleaned condenser coils. Evaporator coils are clean however there is visible bacterial growth on parts of the evaporator coils and the interior walls of the air handler. The indoor Blower wheel, housing, motor, and wiring are severely covered with Bacterial growth. Verified safety float switch functionality. Checked amp draw on compressor. Checked amp draw on fan motor. Checked capacitor is not within factory range
Upon arrival for tune up, found air handler over flowing with water from the supply and return plenums as well as the bottom of the unit. 
System has a clogged drain line and primary safety switch was tilted up which was not allowing for the system to turn off and caused the overflow of water. Cleared drain line as part of tune up. Let client know this is normally an additional charge as it’s not within the scope of a normal maintenance, however today we took care of it at no additional cost. 
Performed Maitenence on system. Cleaned/treated drain line and primary drain pan. Cleaned condenser coils. Evaporator coils are clean however there is visible bacterial growth on parts of the evaporator coils and the interior walls of the air handler. The indoor Blower wheel, housing, motor, and wiring are severely covered with Bacterial growth. Verified safety float switch functionality. Checked amp draw on compressor. Checked amp draw on fan motor. Checked capacitor is not within factory range
Michael A.
Michael A. Checked in
Upon arrival for tune up, found air handler over flowing with water from the supply and return plenums as well as the bottom of the unit. System has a clogged drain line and primary safety switch was tilted up which was not allowing for the system to turn off and caused the overflow of water. Cleared drain line as part of tune up. Let client know this is normally an additional charge as it’s not within the scope of a normal maintenance, however today we took care of it at no additional cost. Performed Maitenence on system. Cleaned/treated drain line and primary drain pan. Cleaned condenser coils. Evaporator coils are clean however there is visible bacterial growth on parts of the evaporator coils and the interior walls of the air handler. The indoor Blower wheel, housing, motor, and wiring are severely covered with Bacterial growth. Verified safety float switch functionality. Checked amp draw on compressor. Checked amp draw on fan motor. Checked capacitor is not within factory range
St. Petersburg, FL 33712
Upon arrival, I performed a full HVAC tuneup. Regarding the diagnostic, temperatures were healthy, electrical was functioning properly, and refrigerant cycle is showing good results. I performed a drain line treatment, a condenser cleaning and an air handler inspection. I recommend recommended a membership program to the homeowner which she said he’ll discuss it with his spouse. If you have any questions, please reach out. Thank you for your business. Have a great day.
Upon arrival, I performed a full HVAC tuneup. Regarding the diagnostic, temperatures were healthy, electrical was functioning properly, and refrigerant cycle is showing good results. I performed a drain line treatment, a condenser cleaning and an air handler inspection. I recommend recommended a membership program to the homeowner which she said he’ll discuss it with his spouse. If you have any questions, please reach out. Thank you for your business. Have a great day.
Ace m.
Ace m. Checked in
Upon arrival, I performed a full HVAC tuneup. Regarding the diagnostic, temperatures were healthy, electrical was functioning properly, and refrigerant cycle is showing good results. I performed a drain line treatment, a condenser cleaning and an air handler inspection. I recommend recommended a membership program to the homeowner which she said he’ll discuss it with his spouse. If you have any questions, please reach out. Thank you for your business. Have a great day.
St. Petersburg, FL 33704
- 16x16 cut in 
- filter back grille

The hallway return needs to be relocated from the wall to the ceiling. The existing return is cracked and is pulling unconditioned attic air into the system. The return duct has already been replaced; the remaining work is to transition the return to the ceiling.

Please use the attached photos as a reference. Install the new ceiling return grille in the living room a few feet away from the existing supply grille, keeping it as close as practical to the current return location. After cutting in the new return, properly seal and close off the old return opening to prevent any air leakage.

If you have any questions, please reach out. Thank you for your business, and have a great day.
- 16x16 cut in 
- filter back grille

The hallway return needs to be relocated from the wall to the ceiling. The existing return is cracked and is pulling unconditioned attic air into the system. The return duct has already been replaced; the remaining work is to transition the return to the ceiling.

Please use the attached photos as a reference. Install the new ceiling return grille in the living room a few feet away from the existing supply grille, keeping it as close as practical to the current return location. After cutting in the new return, properly seal and close off the old return opening to prevent any air leakage.

If you have any questions, please reach out. Thank you for your business, and have a great day.
Kyle K.
Kyle K. Checked in
- 16x16 cut in - filter back grille The hallway return needs to be relocated from the wall to the ceiling. The existing return is cracked and is pulling unconditioned attic air into the system. The return duct has already been replaced; the remaining work is to transition the return to the ceiling. Please use the attached photos as a reference. Install the new ceiling return grille in the living room a few feet away from the existing supply grille, keeping it as close as practical to the current return location. After cutting in the new return, properly seal and close off the old return opening to prevent any air leakage. If you have any questions, please reach out. Thank you for your business, and have a great day.
St. Petersburg, FL 33711
On arrival found downstairs unit not cooling due to low refrigerant levels. Performed leak search on system and found evaporator coil leaking in air handler. Filled unit to factory specs. Will submit estimate for coil replacement. Unit cooling at this time.
On arrival found downstairs unit not cooling due to low refrigerant levels. Performed leak search on system and found evaporator coil leaking in air handler. Filled unit to factory specs. Will submit estimate for coil replacement. Unit cooling at this time.
Justin G.
Justin G. Checked in
On arrival found downstairs unit not cooling due to low refrigerant levels. Performed leak search on system and found evaporator coil leaking in air handler. Filled unit to factory specs. Will submit estimate for coil replacement. Unit cooling at this time.
St. Petersburg, FL 33704
Upon my inspection, found faulty float safety switch and severely clogged drain line and primary drain pan. 
System was due for Maitenence in April but we weren’t able to schedule with the client. Performed a lvl1 drain cleaning and treatment and replaced faulty safety float switch. System is draining properly at this time and safety float switch is working as it should. 
System has a 15° temperature split at this time and I let client know there could be a cooling issue. Told client to let the system dry out for a few days and to let us know if the system seems to be struggling to cool after that. If so, we will need to diagnose the cooling issue.
Upon my inspection, found faulty float safety switch and severely clogged drain line and primary drain pan. 
System was due for Maitenence in April but we weren’t able to schedule with the client. Performed a lvl1 drain cleaning and treatment and replaced faulty safety float switch. System is draining properly at this time and safety float switch is working as it should. 
System has a 15° temperature split at this time and I let client know there could be a cooling issue. Told client to let the system dry out for a few days and to let us know if the system seems to be struggling to cool after that. If so, we will need to diagnose the cooling issue.
Michael A.
Michael A. Checked in
Upon my inspection, found faulty float safety switch and severely clogged drain line and primary drain pan. System was due for Maitenence in April but we weren’t able to schedule with the client. Performed a lvl1 drain cleaning and treatment and replaced faulty safety float switch. System is draining properly at this time and safety float switch is working as it should. System has a 15° temperature split at this time and I let client know there could be a cooling issue. Told client to let the system dry out for a few days and to let us know if the system seems to be struggling to cool after that. If so, we will need to diagnose the cooling issue.
St. Petersburg, FL 33710
Diagnostic 
-failed outdoor capacitor 
-capacitor was causing outdoor fan not to operate 

Replaced capacitor and verified system operations 

Unit is currently cooling and operating within manufacture specifications
Diagnostic 
-failed outdoor capacitor 
-capacitor was causing outdoor fan not to operate 

Replaced capacitor and verified system operations 

Unit is currently cooling and operating within manufacture specifications
Nathan A.
Nathan A. Checked in
Diagnostic -failed outdoor capacitor -capacitor was causing outdoor fan not to operate Replaced capacitor and verified system operations Unit is currently cooling and operating within manufacture specifications
St. Petersburg, FL 33702
Client stated upstairs system struggles to keep temp during summer. Upon my inspection, found system has a 12° temperature split. Checked pressures and found system has a refrigerant restriction at the TXV. Air handler is not sealed to the supply and return plenums. Primary safety float switch is not installed. System is sucking in attic air and blowing semi cool air into the attic. Air handler and condenser are two different brands and years. 
Quote sent for all repairs with no guarantee due to poor system installation and mix matched system not under warranty. 
Quote sent for System replacement to solve issues at once with warranties.
Client stated upstairs system struggles to keep temp during summer. Upon my inspection, found system has a 12° temperature split. Checked pressures and found system has a refrigerant restriction at the TXV. Air handler is not sealed to the supply and return plenums. Primary safety float switch is not installed. System is sucking in attic air and blowing semi cool air into the attic. Air handler and condenser are two different brands and years. 
Quote sent for all repairs with no guarantee due to poor system installation and mix matched system not under warranty. 
Quote sent for System replacement to solve issues at once with warranties.
Michael A.
Michael A. Checked in
Client stated upstairs system struggles to keep temp during summer. Upon my inspection, found system has a 12° temperature split. Checked pressures and found system has a refrigerant restriction at the TXV. Air handler is not sealed to the supply and return plenums. Primary safety float switch is not installed. System is sucking in attic air and blowing semi cool air into the attic. Air handler and condenser are two different brands and years. Quote sent for all repairs with no guarantee due to poor system installation and mix matched system not under warranty. Quote sent for System replacement to solve issues at once with warranties.
St. Petersburg, FL 33704
Reason for call:
No cool in mini split 

Equipment:
Single zone pioneer 

Summary:
On arrival no codes were present. Homeowner said e6 popped up last night. Upon further inspection I found the condenser fan motor was locked up and not spinning the fan see video. 

Homeowner asked about maintenance and cleanings on mini splits. 
Informed her about out two system plan. 
And to expect mini split cleanings in the future. 

Solution:
Sourcing part and providing estimate. 
Charged 95 for diagnostic today plan to credit against repair
Reason for call:
No cool in mini split 

Equipment:
Single zone pioneer 

Summary:
On arrival no codes were present. Homeowner said e6 popped up last night. Upon further inspection I found the condenser fan motor was locked up and not spinning the fan see video. 

Homeowner asked about maintenance and cleanings on mini splits. 
Informed her about out two system plan. 
And to expect mini split cleanings in the future. 

Solution:
Sourcing part and providing estimate. 
Charged 95 for diagnostic today plan to credit against repair
Corbin C.
Corbin C. Checked in
Reason for call: No cool in mini split Equipment: Single zone pioneer Summary: On arrival no codes were present. Homeowner said e6 popped up last night. Upon further inspection I found the condenser fan motor was locked up and not spinning the fan see video. Homeowner asked about maintenance and cleanings on mini splits. Informed her about out two system plan. And to expect mini split cleanings in the future. Solution: Sourcing part and providing estimate. Charged 95 for diagnostic today plan to credit against repair
St. Petersburg, FL 33709
Reason for call:
water leak 

Equipment:
2023 heil above the water heater. 

Summary:
On arrival found drain line clogged. And found float switch failed. Replace float switch and cleared drain. Found operation of equipment operating within manufacturing specifications. 20 td. 
Helped homeowner reconnect thermostat to cell phone app. 

Solution:
She is seasonal and plans to call come spring for tune up from now on.
Reason for call:
water leak 

Equipment:
2023 heil above the water heater. 

Summary:
On arrival found drain line clogged. And found float switch failed. Replace float switch and cleared drain. Found operation of equipment operating within manufacturing specifications. 20 td. 
Helped homeowner reconnect thermostat to cell phone app. 

Solution:
She is seasonal and plans to call come spring for tune up from now on.
Corbin C.
Corbin C. Checked in
Reason for call: water leak Equipment: 2023 heil above the water heater. Summary: On arrival found drain line clogged. And found float switch failed. Replace float switch and cleared drain. Found operation of equipment operating within manufacturing specifications. 20 td. Helped homeowner reconnect thermostat to cell phone app. Solution: She is seasonal and plans to call come spring for tune up from now on.
St. Petersburg, FL 33703
RUUD Equipment
Install New Air Handler 
Install 1” Filter Rack 
Install Adjustable Stand
Install New Outdoor Condenser 
New Filter Drier 
Thermostat Wire Included 
Primary Float Safety Switch
Secondary Float Safety Switch 
UV Rated Outdoor Insulation 
Refrigerant Locking Caps
Flush Existing Refrigerant Lines
Flush Drain Line
Hurricane Tie Down Straps
Vacuum System 
Seal Supply/Return Plenums 
Remove Current Equipment
Replace Breakers (As Needed)
Permitting 
10 Year Parts Warranty
1 Year Labor Warranty 
100% Satisfaction 

*Complimentary System Charge 410a (2lbs)
*Check/Cash Price
RUUD Equipment
Install New Air Handler 
Install 1” Filter Rack 
Install Adjustable Stand
Install New Outdoor Condenser 
New Filter Drier 
Thermostat Wire Included 
Primary Float Safety Switch
Secondary Float Safety Switch 
UV Rated Outdoor Insulation 
Refrigerant Locking Caps
Flush Existing Refrigerant Lines
Flush Drain Line
Hurricane Tie Down Straps
Vacuum System 
Seal Supply/Return Plenums 
Remove Current Equipment
Replace Breakers (As Needed)
Permitting 
10 Year Parts Warranty
1 Year Labor Warranty 
100% Satisfaction 

*Complimentary System Charge 410a (2lbs)
*Check/Cash Price
Justin G.
Justin G. Checked in
RUUD Equipment Install New Air Handler Install 1” Filter Rack Install Adjustable Stand Install New Outdoor Condenser New Filter Drier Thermostat Wire Included Primary Float Safety Switch Secondary Float Safety Switch UV Rated Outdoor Insulation Refrigerant Locking Caps Flush Existing Refrigerant Lines Flush Drain Line Hurricane Tie Down Straps Vacuum System Seal Supply/Return Plenums Remove Current Equipment Replace Breakers (As Needed) Permitting 10 Year Parts Warranty 1 Year Labor Warranty 100% Satisfaction *Complimentary System Charge 410a (2lbs) *Check/Cash Price
St. Petersburg, FL 33703
Performed Maitenence on 1 system. System has a 20° temperature split. Thermostat numbers are fading away. Cleaned drain line and primary drain pan. Drain line and pan were very clogged and had to use compressed nitrogen to clear. Tested safety float switch.   Cleaned condenser coils. Evaporator coils are slightly dirty and are showing some corrosion. Blower wheel is heavily impacted with debris and bacterial growth. Condenser capacitor is very weak and out of its tolerance range. Contactar is corroded and should be replaced along side the capacitor for best safe performance. Condenser fan motor is over amping at 2.8 amps and it’s rated for 2amps. This fan motor has been replaced by another company 2 years ago. Client has concerns of condenser sounding loud at night. 

I recommend looking into replacing with a high efficiency inverter system that is very quiet and will solve this issue completely without having to invest in this out of warranty 11 year old system. 

Client did not want
Performed Maitenence on 1 system. System has a 20° temperature split. Thermostat numbers are fading away. Cleaned drain line and primary drain pan. Drain line and pan were very clogged and had to use compressed nitrogen to clear. Tested safety float switch.   Cleaned condenser coils. Evaporator coils are slightly dirty and are showing some corrosion. Blower wheel is heavily impacted with debris and bacterial growth. Condenser capacitor is very weak and out of its tolerance range. Contactar is corroded and should be replaced along side the capacitor for best safe performance. Condenser fan motor is over amping at 2.8 amps and it’s rated for 2amps. This fan motor has been replaced by another company 2 years ago. Client has concerns of condenser sounding loud at night. 

I recommend looking into replacing with a high efficiency inverter system that is very quiet and will solve this issue completely without having to invest in this out of warranty 11 year old system. 

Client did not want
Michael A.
Michael A. Checked in
Performed Maitenence on 1 system. System has a 20° temperature split. Thermostat numbers are fading away. Cleaned drain line and primary drain pan. Drain line and pan were very clogged and had to use compressed nitrogen to clear. Tested safety float switch. Cleaned condenser coils. Evaporator coils are slightly dirty and are showing some corrosion. Blower wheel is heavily impacted with debris and bacterial growth. Condenser capacitor is very weak and out of its tolerance range. Contactar is corroded and should be replaced along side the capacitor for best safe performance. Condenser fan motor is over amping at 2.8 amps and it’s rated for 2amps. This fan motor has been replaced by another company 2 years ago. Client has concerns of condenser sounding loud at night. I recommend looking into replacing with a high efficiency inverter system that is very quiet and will solve this issue completely without having to invest in this out of warranty 11 year old system. Client did not want
St. Petersburg, FL 33703
On arrival found guest wing unit not cooling due to bad txv. Will submit estimates for repairs. Unit is cooling to the best of it’s ability.
On arrival found guest wing unit not cooling due to bad txv. Will submit estimates for repairs. Unit is cooling to the best of it’s ability.
Justin G.
Justin G. Checked in
On arrival found guest wing unit not cooling due to bad txv. Will submit estimates for repairs. Unit is cooling to the best of it’s ability.
St. Petersburg, FL 33715
Upon my inspection, found system running with a 20° temperature split. Checked pressures and found system has decent pressures. Checked condenser control board and found one fault code for coil temperature sensor. Examined control board and found coil temperature sensor plugs are loose and cannot be secured due to the age. However, system is still running. Evaporator coils are rusting out and corroded. Upon further inspection, I found the nest thermostat. Had Eco mode set to on. The client had just recently turned the setting on. Today we discovered that no one walked by the thermostat for a certain period of time and the thermostat went into Eco mode and set the temperature to 82°. This caused the house to warm up. 
If there is another issue, I advise the client to not touch anything and call us right away. We will not charge another service fee if this issue occurs in the near future (within this week). System is cooling at this time and we turned off the Eco mode.
Upon my inspection, found system running with a 20° temperature split. Checked pressures and found system has decent pressures. Checked condenser control board and found one fault code for coil temperature sensor. Examined control board and found coil temperature sensor plugs are loose and cannot be secured due to the age. However, system is still running. Evaporator coils are rusting out and corroded. Upon further inspection, I found the nest thermostat. Had Eco mode set to on. The client had just recently turned the setting on. Today we discovered that no one walked by the thermostat for a certain period of time and the thermostat went into Eco mode and set the temperature to 82°. This caused the house to warm up. 
If there is another issue, I advise the client to not touch anything and call us right away. We will not charge another service fee if this issue occurs in the near future (within this week). System is cooling at this time and we turned off the Eco mode.
Michael A.
Michael A. Checked in
Upon my inspection, found system running with a 20° temperature split. Checked pressures and found system has decent pressures. Checked condenser control board and found one fault code for coil temperature sensor. Examined control board and found coil temperature sensor plugs are loose and cannot be secured due to the age. However, system is still running. Evaporator coils are rusting out and corroded. Upon further inspection, I found the nest thermostat. Had Eco mode set to on. The client had just recently turned the setting on. Today we discovered that no one walked by the thermostat for a certain period of time and the thermostat went into Eco mode and set the temperature to 82°. This caused the house to warm up. If there is another issue, I advise the client to not touch anything and call us right away. We will not charge another service fee if this issue occurs in the near future (within this week). System is cooling at this time and we turned off the Eco mode.
St. Petersburg, FL 33710
Upon arrival, I noticed that the float which was triggered, I performed a drain line cleaning, a pan cleaning in an air handler inspection. I had a 20° temperature difference, system was performing properly. Do you have any questions? Please reach out thank you for your business. Have a great day.
Upon arrival, I noticed that the float which was triggered, I performed a drain line cleaning, a pan cleaning in an air handler inspection. I had a 20° temperature difference, system was performing properly. Do you have any questions? Please reach out thank you for your business. Have a great day.
Ace m.
Ace m. Checked in
Upon arrival, I noticed that the float which was triggered, I performed a drain line cleaning, a pan cleaning in an air handler inspection. I had a 20° temperature difference, system was performing properly. Do you have any questions? Please reach out thank you for your business. Have a great day.
St. Petersburg, FL 33703
On arrival found downstairs unit not cooling due to clogged drain. Cleared pan and drain. Cleaned condensate pump. Added chemical to help prevent growth. Pressures good. Temp split good. Unit cooling properly at this time.
On arrival found downstairs unit not cooling due to clogged drain. Cleared pan and drain. Cleaned condensate pump. Added chemical to help prevent growth. Pressures good. Temp split good. Unit cooling properly at this time.
Justin G.
Justin G. Checked in
On arrival found downstairs unit not cooling due to clogged drain. Cleared pan and drain. Cleaned condensate pump. Added chemical to help prevent growth. Pressures good. Temp split good. Unit cooling properly at this time.
St. Petersburg, FL 33712
Ace m.
Ace m. Checked in
Upon arrival, I performed a maintenance inspection on the main system. I measured a 17°F temperature difference between the supply and return air, which is within the normal operating range. I inspected the refrigerant circuit and electrical components, and both were operating properly with no issues found. I then serviced the second system and measured a 17°F temperature difference as well, indicating normal performance. The refrigerant circuit and all electrical components were also operating properly. As part of the maintenance, I performed a drain line treatment and cleaned the condenser coils on both systems to help maintain efficient operation. I also recommended enrolling in our maintenance membership program to help keep both systems operating at peak performance and reduce the likelihood of unexpected repairs. If you have any questions, please don’t hesitate to reach out. Thank you for your business, and have a great day! Return grill 2 26.5x24.5 1 26.5x20.5
St. Petersburg, FL 33704
Reason for call:
No cool 

Equipment:
2023 ruud 3 ton 
Vertical on second floor closet 
Condenser located out back 

Summary:
Completed diagnosis to find system low on refrigerant. Added charge to perform leak search and provide temporary cooling for client. 
Found a ton of oil residue on condenser. Fan had sprayed oil all over equipment. identified multiple weak points within the condenser. Where tubes have been rubbing together. At the cap tubes, on txv bulb line and txv discharge line. 

Solution:
Quoted for repair.  Homeowner wants to reach out to installing company.
Reason for call:
No cool 

Equipment:
2023 ruud 3 ton 
Vertical on second floor closet 
Condenser located out back 

Summary:
Completed diagnosis to find system low on refrigerant. Added charge to perform leak search and provide temporary cooling for client. 
Found a ton of oil residue on condenser. Fan had sprayed oil all over equipment. identified multiple weak points within the condenser. Where tubes have been rubbing together. At the cap tubes, on txv bulb line and txv discharge line. 

Solution:
Quoted for repair.  Homeowner wants to reach out to installing company.
Corbin C.
Corbin C. Checked in
Reason for call: No cool Equipment: 2023 ruud 3 ton Vertical on second floor closet Condenser located out back Summary: Completed diagnosis to find system low on refrigerant. Added charge to perform leak search and provide temporary cooling for client. Found a ton of oil residue on condenser. Fan had sprayed oil all over equipment. identified multiple weak points within the condenser. Where tubes have been rubbing together. At the cap tubes, on txv bulb line and txv discharge line. Solution: Quoted for repair. Homeowner wants to reach out to installing company.
St. Petersburg, FL 33716
Inspection, found condenser unit is off due to no high voltage power. Found the condenser disconnect has faulty/loose wire connections. One of the connections is rusted/corroded and melted. Replaced condenser disconnect and tightened up capacitors with straps in the condenser service panel. Client signed up for maintenance plan. Performed first maintenance today. Found severely dirty air filter and recommended Client change it as soon as possible. Once I removed the air filter, system had a 20° temperature split. Air handler is from 2010 and condenser from 2013. Let Client know that this is a mixed matched system which can be an efficiency and functionality issue. Evaporator coils are in very poor condition showing a lot of rust, corrosion, and debris.
Inspected ductwork and found ductwork in very poor condition with many holes, poor connections, and all ducks laying on the trusses instead of being strapped up.

Recommended to the client to prepare for a new ductwork and a new system a
Inspection, found condenser unit is off due to no high voltage power. Found the condenser disconnect has faulty/loose wire connections. One of the connections is rusted/corroded and melted. Replaced condenser disconnect and tightened up capacitors with straps in the condenser service panel. Client signed up for maintenance plan. Performed first maintenance today. Found severely dirty air filter and recommended Client change it as soon as possible. Once I removed the air filter, system had a 20° temperature split. Air handler is from 2010 and condenser from 2013. Let Client know that this is a mixed matched system which can be an efficiency and functionality issue. Evaporator coils are in very poor condition showing a lot of rust, corrosion, and debris.
Inspected ductwork and found ductwork in very poor condition with many holes, poor connections, and all ducks laying on the trusses instead of being strapped up.

Recommended to the client to prepare for a new ductwork and a new system a
Michael A.
Michael A. Checked in
Inspection, found condenser unit is off due to no high voltage power. Found the condenser disconnect has faulty/loose wire connections. One of the connections is rusted/corroded and melted. Replaced condenser disconnect and tightened up capacitors with straps in the condenser service panel. Client signed up for maintenance plan. Performed first maintenance today. Found severely dirty air filter and recommended Client change it as soon as possible. Once I removed the air filter, system had a 20° temperature split. Air handler is from 2010 and condenser from 2013. Let Client know that this is a mixed matched system which can be an efficiency and functionality issue. Evaporator coils are in very poor condition showing a lot of rust, corrosion, and debris. Inspected ductwork and found ductwork in very poor condition with many holes, poor connections, and all ducks laying on the trusses instead of being strapped up. Recommended to the client to prepare for a new ductwork and a new system a
St. Petersburg, FL 33709
Found failed breaker on arrival I have already qouted this breaker before diagnostic is applied. 
Swapped breaker restored operation to the equipment
Found failed breaker on arrival I have already qouted this breaker before diagnostic is applied. 
Swapped breaker restored operation to the equipment
Corbin C.
Corbin C. Checked in
Found failed breaker on arrival I have already qouted this breaker before diagnostic is applied. Swapped breaker restored operation to the equipment
St. Petersburg, FL 33704
Reason for call:
No cool 

Equipment:
2021 rheem package unit 

Summary:
On arrival found failed capacitor. Replaced capacitor and contactor  to restore proper operation to the equipment. Homeownerention another company quote her new duct work. We talked about mini splits and she was interested in quote. See email for estimates. Coil have gotten dirty again. Homeowner complained of dirty sock smell. This could relate to no TV condition of duct work and condition of Evap coil and blower. 

Solution:
Replace cap and contactor today. Provide quote for mini splits.
Reason for call:
No cool 

Equipment:
2021 rheem package unit 

Summary:
On arrival found failed capacitor. Replaced capacitor and contactor  to restore proper operation to the equipment. Homeownerention another company quote her new duct work. We talked about mini splits and she was interested in quote. See email for estimates. Coil have gotten dirty again. Homeowner complained of dirty sock smell. This could relate to no TV condition of duct work and condition of Evap coil and blower. 

Solution:
Replace cap and contactor today. Provide quote for mini splits.
Corbin C.
Corbin C. Checked in
Reason for call: No cool Equipment: 2021 rheem package unit Summary: On arrival found failed capacitor. Replaced capacitor and contactor to restore proper operation to the equipment. Homeownerention another company quote her new duct work. We talked about mini splits and she was interested in quote. See email for estimates. Coil have gotten dirty again. Homeowner complained of dirty sock smell. This could relate to no TV condition of duct work and condition of Evap coil and blower. Solution: Replace cap and contactor today. Provide quote for mini splits.
St. Petersburg, FL 33703
Justin G.
Justin G. Checked in
Clean in place evap coil. Wipe down any growth and dust on pan. Tax and labor included.
St. Petersburg, FL 33711
Performed Maitenence on system. Cleaned/treated drain line and primary drain pan. Cleaned condenser coils. Evaporator coils are dirty. Blower wheel is dirty. Recommending cleanings on both the blower assembly and evaporator coils. Verified safety float switch functionality. Checked amp draw on compressor. Checked amp draw on fan motor. Checked capacitor is within factory range. Inspected Contactar. Made sure all connections are tight. System is cooling with a 20° temperature split at this time.
Changed client supplied filter. 

Sent estimates for Maitenence plan membership and cleanings.
Performed Maitenence on system. Cleaned/treated drain line and primary drain pan. Cleaned condenser coils. Evaporator coils are dirty. Blower wheel is dirty. Recommending cleanings on both the blower assembly and evaporator coils. Verified safety float switch functionality. Checked amp draw on compressor. Checked amp draw on fan motor. Checked capacitor is within factory range. Inspected Contactar. Made sure all connections are tight. System is cooling with a 20° temperature split at this time.
Changed client supplied filter. 

Sent estimates for Maitenence plan membership and cleanings.
Michael A.
Michael A. Checked in
Performed Maitenence on system. Cleaned/treated drain line and primary drain pan. Cleaned condenser coils. Evaporator coils are dirty. Blower wheel is dirty. Recommending cleanings on both the blower assembly and evaporator coils. Verified safety float switch functionality. Checked amp draw on compressor. Checked amp draw on fan motor. Checked capacitor is within factory range. Inspected Contactar. Made sure all connections are tight. System is cooling with a 20° temperature split at this time. Changed client supplied filter. Sent estimates for Maitenence plan membership and cleanings.
St. Petersburg, FL 33714
On arrival found unit not cooling properly due to heavily impacted evaporator coil causing unit to freeze. Tested electrical and found weak capacitor and worn contactor. Will submit estimate for repairs and replacement options. Unit is cooling to the best of its ability at this time.
On arrival found unit not cooling properly due to heavily impacted evaporator coil causing unit to freeze. Tested electrical and found weak capacitor and worn contactor. Will submit estimate for repairs and replacement options. Unit is cooling to the best of its ability at this time.
Justin G.
Justin G. Checked in
On arrival found unit not cooling properly due to heavily impacted evaporator coil causing unit to freeze. Tested electrical and found weak capacitor and worn contactor. Will submit estimate for repairs and replacement options. Unit is cooling to the best of its ability at this time.
St. Petersburg, FL 33711
Reason for call:
No cool 

Equipment:
2006 American standard 
Vertical in closet 
Condenser on roof 

Summary: 
On arrival system was running and cooling well. Found water in saftey switch and a clog in drain. Flushed drain line and clean drain pan. Continued diagnosis to find a rusted capacitor. Capacitor readings were proper but rust can cause failure of this component. 

Solution:
Homeowner approved drain cleaning. Wanted to hold off on capacitor. 

Informed homeowner of age of system. System is on borrowed time at 20 years old.
Reason for call:
No cool 

Equipment:
2006 American standard 
Vertical in closet 
Condenser on roof 

Summary: 
On arrival system was running and cooling well. Found water in saftey switch and a clog in drain. Flushed drain line and clean drain pan. Continued diagnosis to find a rusted capacitor. Capacitor readings were proper but rust can cause failure of this component. 

Solution:
Homeowner approved drain cleaning. Wanted to hold off on capacitor. 

Informed homeowner of age of system. System is on borrowed time at 20 years old.
Corbin C.
Corbin C. Checked in
Reason for call: No cool Equipment: 2006 American standard Vertical in closet Condenser on roof Summary: On arrival system was running and cooling well. Found water in saftey switch and a clog in drain. Flushed drain line and clean drain pan. Continued diagnosis to find a rusted capacitor. Capacitor readings were proper but rust can cause failure of this component. Solution: Homeowner approved drain cleaning. Wanted to hold off on capacitor. Informed homeowner of age of system. System is on borrowed time at 20 years old.
St. Petersburg, FL 33715
How do I know if my AC needs repair or full replacement?

Our technicians inspect the full system — age, refrigerant type, corrosion, and repair history — and give you an honest recommendation. If a repair makes sense, we'll fix it. If the unit is beyond its useful life, we'll walk you through replacement options with no pressure.

Are your technicians background-checked and licensed?

Yes. Every Air Bros technician is background-checked, factory-trained, and works under our state HVAC license (#CAC1820499) and electrical license (#EC13015085).

What parts of St. Petersburg do you serve?

We serve all of St. Petersburg, including Downtown, Historic Kenwood, Old Northeast, Snell Isle, Crescent Lake, Shore Acres, and Coquina Key, plus Seminole, Largo, Pinellas Park, and the surrounding beach communities.

Do you offer same-day AC repair in St. Petersburg?

Yes. We offer 24/7 emergency AC repair with same-day service throughout St. Petersburg and the surrounding Pinellas County area.

Is Air Bros a local St. Petersburg company, or a franchise?

Air Bros is 100% locally owned and operated, headquartered in the Shore Acres neighborhood of St. Petersburg. We're not a franchise — every technician is a direct employee, not a subcontractor.

Contact the Bros You Know Today!

Gravity Forms Pagination Must be Steps