Instant Quote Shop Filters Call Air Bros

St. Petersburg, FL

air-bros-team-with-truck

The Best AC Repair in St. Petersburg, FL — From Technicians Your Neighbors Already Trust

When your AC quits in the middle of a St. Pete summer, you don't want a stranger in an unmarked van. You want a technician your neighbors already know and trust. Air Bros Air Conditioning & Electrical has been fixing air conditioners in St. Petersburg since 2020, but our roots run deeper — founder Ricky Orta grew up learning the trade from his father and has been a licensed HVAC contractor since 2006. That local, hands-on experience is why homeowners from Historic Kenwood to Snell Isle call us the best AC repair company in St. Petersburg.

We're headquartered right here in the Shore Acres neighborhood, so when you call, you're not routed to a call center — you're talking to the same local team that services your street.

Call us at 727-217-6148 or contact us online today for all of your HVAC, indoor air quality and electrical needs.

Meet the technicians who service St. Petersburg

What to expect when we show up

Calling a repair company you've never used before shouldn't feel like a gamble. Here's exactly how an Air Bros service call goes, every time.

You'll get a heads-up before we arrive, then a uniformed technician in a marked Air Bros vehicle shows up in the window we promised. We diagnose the whole system — not just the obvious symptom — then explain what we found and what your options are before any work starts. You approve the price up front, we make the repair, and we don't leave until we've confirmed the system is cooling the way it should.

Every technician is a background-checked, drug-tested Air Bros employee — never a subcontractor — and each one is trained to service every major AC and heat pump brand. It's the kind of consistency you can only get from a local team that answers to its own name.

And if something isn't right? Our 100% satisfaction guarantee means we make it right.

Signs you need AC repair

St. Petersburg's heat and humidity push air conditioners harder than almost anywhere else in the country. Call for AC repair if you notice:

  • Warm air blowing from vents, or the system running constantly without cooling
  • Water pooling around your air handler (a common issue in St. Pete's older homes with attic-run drain lines)
  • Musty odors or visible mold near vents — a sign of a clogged condensate line or dirty coil
  • Rising humidity indoors despite the AC running
  • Short cycling, tripped breakers, or a system that won't turn on at all

Our technicians diagnose the full system on every call — refrigerant charge, temperature split, electrical connections, and drain line — so you get a real fix, not a temporary patch.

Comprehensive HVAC Services in St. Petersburg

We offer a full range of heating and cooling services to keep your St. Petersburg, FL, home comfortable year-round:

  • Air Conditioning: From AC repair and AC installation to routine maintenance, we ensure your cooling system keeps you comfortable during those hot Florida summers. We offer same-day service for AC emergencies, so you never have to suffer in the heat.
  • Heating: Stay warm and cozy in the winter with our comprehensive heating services. We repair and install all types of heating systems, including furnaces and heat pumps, and offer preventative maintenance to keep your system running efficiently.
  • Indoor Air Quality: Improve your indoor air quality with our dehumidifier and UV light installation services. We'll help you control excess humidity and eliminate airborne contaminants, creating a healthier home environment.
  • Ductwork: Ensure optimal airflow and energy efficiency with our ductwork repair and installation services. We can address leaks and damage, and design a system that's perfect for your home.
  • Pool Heater Services: Extend your swim season with our pool heater installation and repair services.
  • Electrical Services: From outlet and switch replacements to ceiling fan installations to whole-house surge protector installations, we have the experts to handle your electrical service needs.

Our experienced technicians are skilled in all aspects of HVAC service and are dedicated to providing top-quality workmanship and customer care.

Why Choose Air Bros?

  • Local Expertise: We understand the unique climate challenges of St. Petersburg.
  • Fast and Reliable Service: We offer same-day service for AC emergencies and prioritize prompt service for all your HVAC needs.
  • Experienced Technicians: Our team is highly trained and experienced in all aspects of HVAC service.
  • Upfront Pricing: We provide transparent pricing with no hidden costs.
  • Customer Satisfaction Guaranteed: Your comfort and satisfaction are our top priorities.

Contact Air Bros Today!

Whether you need emergency AC repair, a new heating system installation, or any other HVAC service, Air Bros is here to help. Contact us today for a free consultation or to schedule a service appointment. We're proud to be your trusted HVAC partner in St. Petersburg!

Call us at 727-217-6148 or contact us online today!

Recent Jobs and Reviews in St. Petersburg, FL

St. Petersburg, FL at a glance

Air Bros Air Conditioning & Electrical has completed 25 jobs in St. Petersburg, FL in July 2026.

The most recent job was on July 6, 2026.

Air Bros Air Conditioning & Electrical has completed 1,919 jobs in St. Petersburg, FL in the last 12 months. The first job there was in December 2024.

Job Locations and Reviews

Griffin K.
Griffin K. Checked in
Send over estimates
St. Petersburg, FL 33701
St. Petersburg, FL - Install ground screw
Griffin K.
Griffin K. Checked in
Install ground screw
St. Petersburg, FL 33701
St. Petersburg, FL - Replace warranty carrier blower motor. Start and test. Tax and labor included.
Justin G.
Justin G. Checked in
Replace warranty carrier blower motor. Start and test. Tax and labor included.
St. Petersburg, FL 33703
Performed Maitenence on system. Cleaned/treated drain line and primary drain pan. Cleaned condenser coils. Evaporator coils are clean. Verified safety float switch functionality. Checked amp draw on compressor. Checked amp draw on fan motor. Checked inverter board connections.  Made sure all connections are tight. System is cooling with a 20° temperature split at this time.

Client would like to hold off on Maitenence plan at this time.
Performed Maitenence on system. Cleaned/treated drain line and primary drain pan. Cleaned condenser coils. Evaporator coils are clean. Verified safety float switch functionality. Checked amp draw on compressor. Checked amp draw on fan motor. Checked inverter board connections.  Made sure all connections are tight. System is cooling with a 20° temperature split at this time.

Client would like to hold off on Maitenence plan at this time.
Michael A.
Michael A. Checked in
Performed Maitenence on system. Cleaned/treated drain line and primary drain pan. Cleaned condenser coils. Evaporator coils are clean. Verified safety float switch functionality. Checked amp draw on compressor. Checked amp draw on fan motor. Checked inverter board connections. Made sure all connections are tight. System is cooling with a 20° temperature split at this time. Client would like to hold off on Maitenence plan at this time.
St. Petersburg, FL 33711
On arrival found unit not cooling due to compressor plug out of compressor. Checked compressor and unit tested out of range. Installed plug and tested. Unit started. Pressures good. Found fan motor over amping. Condenser coils are heavily corroded. System was flooded and is in poor condition. Talked with client about system replacement. Will submit estimate. Unit cooling at this time.
On arrival found unit not cooling due to compressor plug out of compressor. Checked compressor and unit tested out of range. Installed plug and tested. Unit started. Pressures good. Found fan motor over amping. Condenser coils are heavily corroded. System was flooded and is in poor condition. Talked with client about system replacement. Will submit estimate. Unit cooling at this time.
Justin G.
Justin G. Checked in
On arrival found unit not cooling due to compressor plug out of compressor. Checked compressor and unit tested out of range. Installed plug and tested. Unit started. Pressures good. Found fan motor over amping. Condenser coils are heavily corroded. System was flooded and is in poor condition. Talked with client about system replacement. Will submit estimate. Unit cooling at this time.
St. Petersburg, FL 33703
Upon arrival, found system overflowing with condensate. After further inspection, found that the shared communal drain line is severely clogged causing the system in unit 601 to shut off from the primary safety float switch. However, the upstairs unit system continues to run causing an overflow of water for unit 601. This overflow of water was dripping onto the water heater below the air handler. 
Today we had to perform a Level 3 drain cleaning and treatment service on the communal drain line, unit 601 drain line and the primary drain pan. After clearing and treating the drain, the system is able to drain properly. 

Once the system is back to cooling operation, I found the system only has a 13° temperature split. After checking pressures, I found the system is overcharged with refrigerant and the compressor is pulling high amps. I also noticed that the compressor intermittently stops pumping refrigerant properly. The client opted to adjusting the refrigerant charge. I achieved proper
Upon arrival, found system overflowing with condensate. After further inspection, found that the shared communal drain line is severely clogged causing the system in unit 601 to shut off from the primary safety float switch. However, the upstairs unit system continues to run causing an overflow of water for unit 601. This overflow of water was dripping onto the water heater below the air handler. 
Today we had to perform a Level 3 drain cleaning and treatment service on the communal drain line, unit 601 drain line and the primary drain pan. After clearing and treating the drain, the system is able to drain properly. 

Once the system is back to cooling operation, I found the system only has a 13° temperature split. After checking pressures, I found the system is overcharged with refrigerant and the compressor is pulling high amps. I also noticed that the compressor intermittently stops pumping refrigerant properly. The client opted to adjusting the refrigerant charge. I achieved proper
Michael A.
Michael A. Checked in
Upon arrival, found system overflowing with condensate. After further inspection, found that the shared communal drain line is severely clogged causing the system in unit 601 to shut off from the primary safety float switch. However, the upstairs unit system continues to run causing an overflow of water for unit 601. This overflow of water was dripping onto the water heater below the air handler. Today we had to perform a Level 3 drain cleaning and treatment service on the communal drain line, unit 601 drain line and the primary drain pan. After clearing and treating the drain, the system is able to drain properly. Once the system is back to cooling operation, I found the system only has a 13° temperature split. After checking pressures, I found the system is overcharged with refrigerant and the compressor is pulling high amps. I also noticed that the compressor intermittently stops pumping refrigerant properly. The client opted to adjusting the refrigerant charge. I achieved proper
St. Petersburg, FL 33702
My inspection, found system turned off. Landowner states that when he turned the system on, he heard a noise, but the fan motor was not coming on at the condenser. I turned the system on, and everything came on. Checked Amp draws, checked capacitor, checked all wiring connections are tight. System is cooling with a 17° temperature split. I inspected the condenser coils and found dirty condenser coils. Client signed up for maintenance plan and I performed first maintenance today, including cleaning the condenser coils. System is cooling at this time.

Compressor was pulling higher amps close to its max rating.
My inspection, found system turned off. Landowner states that when he turned the system on, he heard a noise, but the fan motor was not coming on at the condenser. I turned the system on, and everything came on. Checked Amp draws, checked capacitor, checked all wiring connections are tight. System is cooling with a 17° temperature split. I inspected the condenser coils and found dirty condenser coils. Client signed up for maintenance plan and I performed first maintenance today, including cleaning the condenser coils. System is cooling at this time.

Compressor was pulling higher amps close to its max rating.
Michael A.
Michael A. Checked in
My inspection, found system turned off. Landowner states that when he turned the system on, he heard a noise, but the fan motor was not coming on at the condenser. I turned the system on, and everything came on. Checked Amp draws, checked capacitor, checked all wiring connections are tight. System is cooling with a 17° temperature split. I inspected the condenser coils and found dirty condenser coils. Client signed up for maintenance plan and I performed first maintenance today, including cleaning the condenser coils. System is cooling at this time. Compressor was pulling higher amps close to its max rating.
St. Petersburg, FL 33702
2701 4th Street north Location
Lobby AC:
Found secondary emergency pan full of water and turned unit off by the secondary float switch 
- Clean and treat drain line and primary drain pan/remove all water from secondary safety pan. 
- Add 2 lbs refrigerant to system
System had a 16° temp split. Now it has 21° split after refrigerant. If system loses refrigerant again in the future, we will need to perform a leak search. 
- If system continues to fill the emergency pan with water, we will need to inspect/replace the primary drain pan for possible cracks. 
- Verified system is draining at this time. 

Kitchen AC: 
- System has been leaking water for a while now. Another company made attempts to resolve this issue. 
- System has an issue with the primary drain pan allowing water to drain out of the appropriate drain connection. 
System is under parts warranty. Quote being sent to replace the primary drain pan along with the evaporator coils. While coils are removed, we will raise the unit
2701 4th Street north Location
Lobby AC:
Found secondary emergency pan full of water and turned unit off by the secondary float switch 
- Clean and treat drain line and primary drain pan/remove all water from secondary safety pan. 
- Add 2 lbs refrigerant to system
System had a 16° temp split. Now it has 21° split after refrigerant. If system loses refrigerant again in the future, we will need to perform a leak search. 
- If system continues to fill the emergency pan with water, we will need to inspect/replace the primary drain pan for possible cracks. 
- Verified system is draining at this time. 

Kitchen AC: 
- System has been leaking water for a while now. Another company made attempts to resolve this issue. 
- System has an issue with the primary drain pan allowing water to drain out of the appropriate drain connection. 
System is under parts warranty. Quote being sent to replace the primary drain pan along with the evaporator coils. While coils are removed, we will raise the unit
Michael A.
Michael A. Checked in
2701 4th Street north Location Lobby AC: Found secondary emergency pan full of water and turned unit off by the secondary float switch - Clean and treat drain line and primary drain pan/remove all water from secondary safety pan. - Add 2 lbs refrigerant to system System had a 16° temp split. Now it has 21° split after refrigerant. If system loses refrigerant again in the future, we will need to perform a leak search. - If system continues to fill the emergency pan with water, we will need to inspect/replace the primary drain pan for possible cracks. - Verified system is draining at this time. Kitchen AC: - System has been leaking water for a while now. Another company made attempts to resolve this issue. - System has an issue with the primary drain pan allowing water to drain out of the appropriate drain connection. System is under parts warranty. Quote being sent to replace the primary drain pan along with the evaporator coils. While coils are removed, we will raise the unit
St. Petersburg, FL 33710
On arrival found unit not cooling properly due to clogged media filter. Removed filter and tested. Pressures good. Temp split good. Unit cooling properly at this time.
On arrival found unit not cooling properly due to clogged media filter. Removed filter and tested. Pressures good. Temp split good. Unit cooling properly at this time.
Justin G.
Justin G. Checked in
On arrival found unit not cooling properly due to clogged media filter. Removed filter and tested. Pressures good. Temp split good. Unit cooling properly at this time.
St. Petersburg, FL 33707
Upon my inspection, found bad capacitor and older contactar. Replaced both components and started system. System is cooling at this time with an 18° temp split.
Upon my inspection, found bad capacitor and older contactar. Replaced both components and started system. System is cooling at this time with an 18° temp split.
Michael A.
Michael A. Checked in
Upon my inspection, found bad capacitor and older contactar. Replaced both components and started system. System is cooling at this time with an 18° temp split.
St. Petersburg, FL 33711
Upon arrival, I diagnose the blower motor and it came back as failing. I recommended a system replacement for the homeowner but he wanted to go with the repair so I repaired and replaced the motor. The system is currently working with a 21° temperature difference. Do you have any questions? Please reach out. Thank you for your business. Have a great day.
Upon arrival, I diagnose the blower motor and it came back as failing. I recommended a system replacement for the homeowner but he wanted to go with the repair so I repaired and replaced the motor. The system is currently working with a 21° temperature difference. Do you have any questions? Please reach out. Thank you for your business. Have a great day.
Ace m.
Ace m. Checked in
Upon arrival, I diagnose the blower motor and it came back as failing. I recommended a system replacement for the homeowner but he wanted to go with the repair so I repaired and replaced the motor. The system is currently working with a 21° temperature difference. Do you have any questions? Please reach out. Thank you for your business. Have a great day.
St. Petersburg, FL 33703
Scope of work:
- Replace entire air handler blower housing and motor/Wireharness
- Replace Capacitor at condenser unit
- Install UV air purification system inside air handler to help prevent growth from returning
- Sanitize and clean interior of air handler and sides of evaporator coils

**1 year parts and labor warranty on repairs today.**
Scope of work:
- Replace entire air handler blower housing and motor/Wireharness
- Replace Capacitor at condenser unit
- Install UV air purification system inside air handler to help prevent growth from returning
- Sanitize and clean interior of air handler and sides of evaporator coils

**1 year parts and labor warranty on repairs today.**
Michael A.
Michael A. Checked in
Scope of work: - Replace entire air handler blower housing and motor/Wireharness - Replace Capacitor at condenser unit - Install UV air purification system inside air handler to help prevent growth from returning - Sanitize and clean interior of air handler and sides of evaporator coils **1 year parts and labor warranty on repairs today.**
St. Petersburg, FL 33712
Ruud 2.5 ton 15.2 seer2 heat pump split system with 5kw heater
2-stage equipment 
Hurricane pad
Anchor condenser
Clear drain
WiFi thermostat
Uv rated insulation for outdoor copper
Refrigerant locking caps
Aux drain pan
Primary float switch
Secondary float switch
Remove existing equipment 
Connect to existing ducts and electrical 
Seal unit to code
Tax labor and permit included 
10 year parts warranty 
3 year labor warranty 
0% for 18 months financing included. 
Client is approved for financing 
Set speed to 2-3 speed
Ruud 2.5 ton 15.2 seer2 heat pump split system with 5kw heater
2-stage equipment 
Hurricane pad
Anchor condenser
Clear drain
WiFi thermostat
Uv rated insulation for outdoor copper
Refrigerant locking caps
Aux drain pan
Primary float switch
Secondary float switch
Remove existing equipment 
Connect to existing ducts and electrical 
Seal unit to code
Tax labor and permit included 
10 year parts warranty 
3 year labor warranty 
0% for 18 months financing included. 
Client is approved for financing 
Set speed to 2-3 speed
Justin G.
Justin G. Checked in
Ruud 2.5 ton 15.2 seer2 heat pump split system with 5kw heater 2-stage equipment Hurricane pad Anchor condenser Clear drain WiFi thermostat Uv rated insulation for outdoor copper Refrigerant locking caps Aux drain pan Primary float switch Secondary float switch Remove existing equipment Connect to existing ducts and electrical Seal unit to code Tax labor and permit included 10 year parts warranty 3 year labor warranty 0% for 18 months financing included. Client is approved for financing Set speed to 2-3 speed
St. Petersburg, FL 33709
Corbin C.
Corbin C. Checked in
Reason for call: Tune up on 3 systems Equipment: Two zone Mitsubishi mini split Single zone Mitsubishi mini split Central unit vertical in garage Condenser out back Summary: Completed tune ups to find equipment operating well found one mini split dripping water inside pulled head off want and reinsulated line to prevent problem. Confirmed drip is no longer present.
St. Petersburg, FL 33703
Performed Maitenence on system. 
Issues:
Found faulty safety float switch
Drain line is not able to drain properly because the drain like connections to the primary drain pan were cross threaded and in turn had improper pitch. Unit was flooding. 
Replaced safety float switch and reconstructed drain line the best I could. 
If issue persists, we will need to replace the warranty coil and drain pan. 
System is cooling with a 17-18° temperature split. 
Checked pressures and pressure indicate system is possibly low on refrigerant. Client hasn’t noticed any issues with cooling so they would like to leave it alone at this time. 
Cleaned and treated drain line and primary drain pan. 
Unit is draining at this time but no guarantee due to cross threaded damaged primary drain pan. 
Cleaned condenser coils
Checked amp draws
Capacitor tested good
Contactar is in good condition
Blower wheel is clean
Verified new safety float switch functionality
Performed Maitenence on system. 
Issues:
Found faulty safety float switch
Drain line is not able to drain properly because the drain like connections to the primary drain pan were cross threaded and in turn had improper pitch. Unit was flooding. 
Replaced safety float switch and reconstructed drain line the best I could. 
If issue persists, we will need to replace the warranty coil and drain pan. 
System is cooling with a 17-18° temperature split. 
Checked pressures and pressure indicate system is possibly low on refrigerant. Client hasn’t noticed any issues with cooling so they would like to leave it alone at this time. 
Cleaned and treated drain line and primary drain pan. 
Unit is draining at this time but no guarantee due to cross threaded damaged primary drain pan. 
Cleaned condenser coils
Checked amp draws
Capacitor tested good
Contactar is in good condition
Blower wheel is clean
Verified new safety float switch functionality
Michael A.
Michael A. Checked in
Performed Maitenence on system. Issues: Found faulty safety float switch Drain line is not able to drain properly because the drain like connections to the primary drain pan were cross threaded and in turn had improper pitch. Unit was flooding. Replaced safety float switch and reconstructed drain line the best I could. If issue persists, we will need to replace the warranty coil and drain pan. System is cooling with a 17-18° temperature split. Checked pressures and pressure indicate system is possibly low on refrigerant. Client hasn’t noticed any issues with cooling so they would like to leave it alone at this time. Cleaned and treated drain line and primary drain pan. Unit is draining at this time but no guarantee due to cross threaded damaged primary drain pan. Cleaned condenser coils Checked amp draws Capacitor tested good Contactar is in good condition Blower wheel is clean Verified new safety float switch functionality
St. Petersburg, FL 33704
Replace evaporator coil and pan for horizontal unit. Install primary float switch. Disconnect condensate pump and connect back to drain. Clear drain with chemical. Replace supply plenum. Reconnect ducts in attic. Seal and strap ducts to code. Start and test.
Replace evaporator coil and pan for horizontal unit. Install primary float switch. Disconnect condensate pump and connect back to drain. Clear drain with chemical. Replace supply plenum. Reconnect ducts in attic. Seal and strap ducts to code. Start and test.
Justin G.
Justin G. Checked in
Replace evaporator coil and pan for horizontal unit. Install primary float switch. Disconnect condensate pump and connect back to drain. Clear drain with chemical. Replace supply plenum. Reconnect ducts in attic. Seal and strap ducts to code. Start and test.
St. Petersburg, FL 33715
Upon arrival found system frozen over. Thawed out system completely to check pressures. 

Verified pressures and air handler motor operation 

No water in safety switch 

Found air filter heavily impacted and not allowing air to pass through system 

System is currently operating
Upon arrival found system frozen over. Thawed out system completely to check pressures. 

Verified pressures and air handler motor operation 

No water in safety switch 

Found air filter heavily impacted and not allowing air to pass through system 

System is currently operating
Nathan A.
Nathan A. Checked in
Upon arrival found system frozen over. Thawed out system completely to check pressures. Verified pressures and air handler motor operation No water in safety switch Found air filter heavily impacted and not allowing air to pass through system System is currently operating
St. Petersburg, FL 33712
Upon arrival I started off taking a temperature difference between the supply and the return and I had a 19° difference being in a healthy range. Moving onto refrigerant levels are in proper range in electrical functioning properly. This was a drain line issue, sensor were triggered. I performed a drain line cleaning to ensure proper drainage. If you have any questions, please reach out. Thank you for your business. Have a great day.
Upon arrival I started off taking a temperature difference between the supply and the return and I had a 19° difference being in a healthy range. Moving onto refrigerant levels are in proper range in electrical functioning properly. This was a drain line issue, sensor were triggered. I performed a drain line cleaning to ensure proper drainage. If you have any questions, please reach out. Thank you for your business. Have a great day.
Ace m.
Ace m. Checked in
Upon arrival I started off taking a temperature difference between the supply and the return and I had a 19° difference being in a healthy range. Moving onto refrigerant levels are in proper range in electrical functioning properly. This was a drain line issue, sensor were triggered. I performed a drain line cleaning to ensure proper drainage. If you have any questions, please reach out. Thank you for your business. Have a great day.
St. Petersburg, FL 33702
Mitsubishi 12k heat pump
12 year parts warranty
3 year labor warranty
-Electric run off existing junction. 
-Wall mount bracket
-Insulated line set
-Drain line
-Line cover
-Foam seal penetrations
-Comm wire 
-Pressure test system 
-Mount condenser high

changing thermostat for main system - our thermostat
moving a duct on the plenum
Mitsubishi 12k heat pump
12 year parts warranty
3 year labor warranty
-Electric run off existing junction. 
-Wall mount bracket
-Insulated line set
-Drain line
-Line cover
-Foam seal penetrations
-Comm wire 
-Pressure test system 
-Mount condenser high

changing thermostat for main system - our thermostat
moving a duct on the plenum
Martin W.
Martin W. Checked in
Mitsubishi 12k heat pump 12 year parts warranty 3 year labor warranty -Electric run off existing junction. -Wall mount bracket -Insulated line set -Drain line -Line cover -Foam seal penetrations -Comm wire -Pressure test system -Mount condenser high changing thermostat for main system - our thermostat moving a duct on the plenum
St. Petersburg, FL 33703
Ruud 3 ton 15.2 seer2 heat pump split system with 5kw heater
Hurricane pad
Anchor condenser
WiFi thermostat
Aux pan
Primary float switch
Secondary float switch
Refrigerant locking caps
Clear drain
Uv rated insulation for outdoor copper
Remove existing equipment 
Connect to existing ducts and electrical 
Seal unit to code
Tax labor and permit included 
10 year parts warranty 
3 year labor warranty
Ruud 3 ton 15.2 seer2 heat pump split system with 5kw heater
Hurricane pad
Anchor condenser
WiFi thermostat
Aux pan
Primary float switch
Secondary float switch
Refrigerant locking caps
Clear drain
Uv rated insulation for outdoor copper
Remove existing equipment 
Connect to existing ducts and electrical 
Seal unit to code
Tax labor and permit included 
10 year parts warranty 
3 year labor warranty
Kyle K.
Kyle K. Checked in
Ruud 3 ton 15.2 seer2 heat pump split system with 5kw heater Hurricane pad Anchor condenser WiFi thermostat Aux pan Primary float switch Secondary float switch Refrigerant locking caps Clear drain Uv rated insulation for outdoor copper Remove existing equipment Connect to existing ducts and electrical Seal unit to code Tax labor and permit included 10 year parts warranty 3 year labor warranty
St. Petersburg, FL 33709
Reason for call:
No cool 

Equipment:
2016 Goodman furnace 
Metal duct work 

Summary:
On arrival found duct work not supply bedrooms with proper air. Inspected duct work to find very tight attic. Replacement of duct work would not be cost effective. We recommend looking into mini slit system for cooling. 

Solution: provide estimate by end of day.
Reason for call:
No cool 

Equipment:
2016 Goodman furnace 
Metal duct work 

Summary:
On arrival found duct work not supply bedrooms with proper air. Inspected duct work to find very tight attic. Replacement of duct work would not be cost effective. We recommend looking into mini slit system for cooling. 

Solution: provide estimate by end of day.
Corbin C.
Corbin C. Checked in
Reason for call: No cool Equipment: 2016 Goodman furnace Metal duct work Summary: On arrival found duct work not supply bedrooms with proper air. Inspected duct work to find very tight attic. Replacement of duct work would not be cost effective. We recommend looking into mini slit system for cooling. Solution: provide estimate by end of day.
St. Petersburg, FL 33705
Reason for call:
No cool 

Equipment:
2020 2.5 ton train straight cool 
Horizontal in attic 
Condenser out back 

Summary:
On arrival found that float switch was tripped. Found that handyman came by before me and vacuumed drain. He did not flush and did not reset float. Continued diagnosis to find supply plenum had very poor connection to equipment and leaking conditioned air into attic space. 
Confirmed pressures, temperature, and drain flow. Equipment was operating within manufacturing specifications.
Reason for call:
No cool 

Equipment:
2020 2.5 ton train straight cool 
Horizontal in attic 
Condenser out back 

Summary:
On arrival found that float switch was tripped. Found that handyman came by before me and vacuumed drain. He did not flush and did not reset float. Continued diagnosis to find supply plenum had very poor connection to equipment and leaking conditioned air into attic space. 
Confirmed pressures, temperature, and drain flow. Equipment was operating within manufacturing specifications.
Corbin C.
Corbin C. Checked in
Reason for call: No cool Equipment: 2020 2.5 ton train straight cool Horizontal in attic Condenser out back Summary: On arrival found that float switch was tripped. Found that handyman came by before me and vacuumed drain. He did not flush and did not reset float. Continued diagnosis to find supply plenum had very poor connection to equipment and leaking conditioned air into attic space. Confirmed pressures, temperature, and drain flow. Equipment was operating within manufacturing specifications.
St. Petersburg, FL 33702
Downstairs 1.5 Ton system. Client states last weekend thermostat was at 78 and could not get down to set temperature. Client went into attic and changed something with the fresh air intake device and system turned back on. 
Upon my inspection today, found system has a 26° temp split and is cooling. This high temp split is not efficient for the system and after further investigation I found severely dirty air filters. Recommended client replaces these asap and then see how the system performs afterwards. Let client know if an issue arises again, do not touch anything and call us immediately. Will not charge another $95 fee if we have to go back out within a week. 
Checked pressures and system pressures show the system may be low on refrigerant but we cannot confirm until new filters are installed first. 

Notes:
Client said they had another company replace the evaporator coils and clean the blower wheel.
Downstairs 1.5 Ton system. Client states last weekend thermostat was at 78 and could not get down to set temperature. Client went into attic and changed something with the fresh air intake device and system turned back on. 
Upon my inspection today, found system has a 26° temp split and is cooling. This high temp split is not efficient for the system and after further investigation I found severely dirty air filters. Recommended client replaces these asap and then see how the system performs afterwards. Let client know if an issue arises again, do not touch anything and call us immediately. Will not charge another $95 fee if we have to go back out within a week. 
Checked pressures and system pressures show the system may be low on refrigerant but we cannot confirm until new filters are installed first. 

Notes:
Client said they had another company replace the evaporator coils and clean the blower wheel.
Michael A.
Michael A. Checked in
Downstairs 1.5 Ton system. Client states last weekend thermostat was at 78 and could not get down to set temperature. Client went into attic and changed something with the fresh air intake device and system turned back on. Upon my inspection today, found system has a 26° temp split and is cooling. This high temp split is not efficient for the system and after further investigation I found severely dirty air filters. Recommended client replaces these asap and then see how the system performs afterwards. Let client know if an issue arises again, do not touch anything and call us immediately. Will not charge another $95 fee if we have to go back out within a week. Checked pressures and system pressures show the system may be low on refrigerant but we cannot confirm until new filters are installed first. Notes: Client said they had another company replace the evaporator coils and clean the blower wheel.
St. Petersburg, FL 33703
Upon my inspection, found system was double filtered, and the filter at the unit was in there since the system was installed. This was restricting airflow and causing a high temperature split. Upon further diagnosis, found thermostat wire from condenser to air handler is faulty for the second stage blower motor setting. Hardwired air handler to run at medium speed for now but sending quote to replace entire thermostat wire from condenser to air handler for a guaranteed solution. System is cooling at this time with a 23° temperature split previous temperature split was 30°.
Upon my inspection, found system was double filtered, and the filter at the unit was in there since the system was installed. This was restricting airflow and causing a high temperature split. Upon further diagnosis, found thermostat wire from condenser to air handler is faulty for the second stage blower motor setting. Hardwired air handler to run at medium speed for now but sending quote to replace entire thermostat wire from condenser to air handler for a guaranteed solution. System is cooling at this time with a 23° temperature split previous temperature split was 30°.
Michael A.
Michael A. Checked in
Upon my inspection, found system was double filtered, and the filter at the unit was in there since the system was installed. This was restricting airflow and causing a high temperature split. Upon further diagnosis, found thermostat wire from condenser to air handler is faulty for the second stage blower motor setting. Hardwired air handler to run at medium speed for now but sending quote to replace entire thermostat wire from condenser to air handler for a guaranteed solution. System is cooling at this time with a 23° temperature split previous temperature split was 30°.
St. Petersburg, FL 33702
Replace evaporator coil. 
Performed pressure test. 
Pull deep vacuum. 
Recharged with 410. 
20 degree split. 
Drain is operating well. 
Please allow time for the system to cool the space.
Replace evaporator coil. 
Performed pressure test. 
Pull deep vacuum. 
Recharged with 410. 
20 degree split. 
Drain is operating well. 
Please allow time for the system to cool the space.
Corbin C.
Corbin C. Checked in
Replace evaporator coil. Performed pressure test. Pull deep vacuum. Recharged with 410. 20 degree split. Drain is operating well. Please allow time for the system to cool the space.
St. Petersburg, FL 33711
How do I know if my AC needs repair or full replacement?

Our technicians inspect the full system — age, refrigerant type, corrosion, and repair history — and give you an honest recommendation. If a repair makes sense, we'll fix it. If the unit is beyond its useful life, we'll walk you through replacement options with no pressure.

Are your technicians background-checked and licensed?

Yes. Every Air Bros technician is background-checked, factory-trained, and works under our state HVAC license (#CAC1820499) and electrical license (#EC13015085).

What parts of St. Petersburg do you serve?

We serve all of St. Petersburg, including Downtown, Historic Kenwood, Old Northeast, Snell Isle, Crescent Lake, Shore Acres, and Coquina Key, plus Seminole, Largo, Pinellas Park, and the surrounding beach communities.

Do you offer same-day AC repair in St. Petersburg?

Yes. We offer 24/7 emergency AC repair with same-day service throughout St. Petersburg and the surrounding Pinellas County area.

Is Air Bros a local St. Petersburg company, or a franchise?

Air Bros is 100% locally owned and operated, headquartered in the Shore Acres neighborhood of St. Petersburg. We're not a franchise — every technician is a direct employee, not a subcontractor.

Contact the Bros You Know Today!

Gravity Forms Pagination Must be Steps